Enquiry & selection

Technical requirements

For motor controllers, 3-in-1 drive units and motors. Tell us about your company, market, vehicle and the functions you need; our engineers reply with a recommended configuration and datasheets. Only fields marked * are required; leave anything you are unsure of blank.

  1. 1Fill in the form, about 5–8 minutes
  2. 2An engineer reviews the requirements
  3. 3You receive a recommendation and datasheets
01Contact

Who should our engineers reply to?

Preferred way to reach you

02Company & market

Helps us understand your business and where the vehicles will be sold. All optional.

Target market

Certifications required

How did you hear about us?

03Project

The vehicle and the schedule you are planning for.

km/h
kg
04Electrical

Battery and power targets. Approximate values are fine.

V

Nominal voltage

kW
kW
A
A
05Motor

If you already have a motor, tell us how it is instrumented.

Position sensor

rpm
N·m
06Functions

Tick what the vehicle needs. Standard protections are always included.

Gears

Ride and control modes

Assist functions

Throttle signal

Fault indication

Standard protection and diagnostics Under / over-voltage, over-current / short circuit, stall, MOSFET and motor over-temperature, position-sensor fault, phase loss, throttle fault.

07Communication

Interfaces to the vehicle and how the controller is tuned and updated.

Interfaces

Firmware update

Parameter tuning

08Mechanical & environment

Installation space, cooling and the conditions the controller must survive.

Cooling

mm
°C
09Anything else

Connectors, marking, packaging, warranty, or anything the fields above miss.

Have drawings, a motor datasheet or a completed checklist? Send them to barry@vector-ev.com after submitting and mention your company name.

By submitting you agree that we use this information to answer your enquiry and for nothing else.